|
Guidelines for Sample Collection and
Handling of Human Clinical samples for Laboratory
Diagnosis of H1N1 Influenza
CASE
DEFINITION OF H1N1 INFLUENZA
A
suspected case of swine influenza A (H1N1) virus
infection is defined as a person with acute febrile
respiratory illness (fever = 38°C) with onset.
-
within 7 days of close contact with a person who
is a confirmed case of swine influenza A (H1N1)
virus infection, or
-
within 7 days of travel to areas where there are
one or more confirmed swine influenza A(H1N1)
cases, or
-
resides in a community where there are one or
more confirmed swine influenza cases.
A
probable case of swine influenza A (H1N1) virus
infection is defined as a person with an acute
febrile respiratory illness who:
-
is positive for influenza A, but unsubtypable
for H1 and H3 by influenza RTPCR or reagents
used to detect seasonal influenza virus
infection, or
-
is positive for influenza A by an influenza
rapid test or an influenza immunofluorescence
assay (IFA) plus meets criteria for a suspected
case, or
-
individual with a clinically compatible illness
who died of an unexplained acute respiratory
illness who is considered to be
epidemiologically linked to a probable or
confirmed case.
A
confirmed case of swine influenza A (H1N1) virus
infection is defined as a person with an acute
febrile respiratory illness with laboratory
confirmed swine influenza A (H1N1) virus infection
at WHO approved laboratories by one or more of the
following tests:
If any case fits in the case definition then samples
should be collected according to the sample
collection guidelines.
What sample to
be collected?
Respiratory specimens including: bronchoalveolar
lavage, tracheal aspirates, nasopharyngeal or
oropharyngeal aspirates as washes, and
nasopharyngeal or oropharyngeal swabs. Swab
specimens should be collected only on swabs with a
synthetic tip (such as polyester or Dacron) and
aluminium or plastic shaft. Swabs with cotton and
wooden shafts are not recommended. Specimens
collected with swabs made of calcium alginate are
acceptable.
When
to Collect Respiratory Specimens?
-
As soon as possible after symptoms begin
-
Before antiviral medications are administered
-
Even if symptoms began more than one week ago
-
Multiple specimens on multiple days could be
collected if you have access to patient
Specimen: before initiating collection of sample a
full complement of PPE should be worn.
Personal
Protective Equipment
Methods of Collection
Throat Swab
-
Easy to do
-
Highest yield in detecting H1N1 influenza in
suspected cases
-
Have the patient open his/her mouth wide open.
-
The patient should try to resist gagging and
closing the mouth while the swab touches the
back of the throat near the tonsils.
-
Nasal / Nasopharyngeal Swab: Insert dry swab
into nostril and back to nasopharynx. Leave in
place for a few seconds. Slowly remove swab
while
-
slightly rotating it. Use a different swab for
the other nostril. Put tip of swab into vial
containing VTM, breaking applicator's stick.
-
Nasal Swab is collected from the anterior
turbinate.
Throat swabs can be collected into the same VTM to
increase the viral yield
How to Label Samples Use pre-printed barcode* labels:
-
On the specimen container
-
On the field data collection form
-
On the log book
-
Subject's name
-
Subject's unique identification number
Label
Specimen No. :
Patient's Name :
Hospital Name :
Unique ID No. :
How to Store Specimens
-
Store specimens at 4 °C before and during
transportation within 48 hours
-
Store specimens at -70 °C beyond 48 hours
-
Do not store in standard freezer - keep on ice
or in refrigerator
-
Avoid freeze-thaw cycles
-
Better to keep on ice for a week than to have
repeat freeze and thaw
Transportation
of specimens
Refer to WHO guidelines for the safe transport of
infectious substances and diagnostic specimens
should be transported after proper packaging using
the standard triple packaging system (WHO) and it
should accompany with the clinical details as per
proforma enclosed in Annexure I
While transportation cold chain should be maintained
Waste Disposal: should be done as per guidelines of
your hospital Maintain adequately stocked specimen
collection kits and store them properly.
Throat swabs are the easiest and best specimens to
collect for suspected cases of avian influenza.
Nasal swabs are easy to collect as well and should
be done to increase yield.
Collect multiple specimens (respiratory and blood)
on multiple days.
General
Biosafety Measures
-
Clinical samples should be collected by hospital
staff and not by the laboratory staff.
-
All clinical samples have to be collected
wearing complete complement of PPE.
-
While taking samples always use N95 mask.
-
Use Latex disposable gloves.
-
Wear laboratory coat/disposable apron.
-
Always cover your hairs with head cover.
-
Use protective eye wear (goggles)/face shields
-
The clinical samples should be processed only in
designated laboratory having the appropriate
containment facilities.
-
All technical procedures should be performed in
a way that minimizes the formation of aerosols
and droplets.
-
Adequate and conveniently located biohazard
containers should be available for disposal of
contaminated materials.
-
Work surfaces must be decontaminated after any
sp ill of potentially dangerous material and at
the end of the working day. Generally, 5% bleach
solutions are appropriate for dealing with
biohazard us spillage. More information on
disinfections and sterilization is provided in
the WHO laboratory biosafety manual.
-
Personnel must wash their hands often ?
especially after handling infectious materials
and , before leaving the laboratory working
areas, and before eating.
-
Personal protective equipment must be removed
before leaving the laboratory.
NOTE:
Whenever sample is send to laboratory(NICD, Delhi;
NIV, Pune) a certificate should be attached with it
stating that the sample is for research purpose and
is packed properly and not hazardous to the
community
. |